Accessories for INDUSTRIAL and SAFETY footwear

Over-sock to be worn for protection of the forehead and instep against cut injuries.

Cut resistant over-sock

The sock is composed by a protective material in the front side of leg and the instep tested to resist the cut from different causes completed with an elastic and abrasion resistant fabric that allows the perfect fit for everybody with the same size.
This sock is designed to be worn with a normal safety shoe to improve the protection against injuries without changing footwear
Compositions: protective part: 90% para aramid fiber – 10% viscose
back side: 80% polyamide – 20% elastane
Thickness protective part: 1.50 mm
Thickness back and side: 0.30 mm
Protective part: tested against cut from sharp object
EN ISO 13997:1999 Level B tested against cut from impact
EN 13595-4:2009 – Level 1
Back and side: resistant to pilling on fabric: 5
(NU Martindale – ISO 12945-2 7000 rotations)
resistant to pilling on wool: 5
(NU Martindale – ISO 12945-2 7000 rotations)

Thermal and high visibility over-sock

Over-sock made with a high insulation and antibacterial fabric.
This technical fabric is made with an internaly brushed finishing that allows a high insulation level helping to keep warm the foot even with low insulation footwear.
The design of this product is made thinking to protect from cold not only the foot but the leg until the knee.
Main color available is black but can be available in high visibility colors like yellow fluo and orange fluo.
Composition: 85% Polyamide – 15% Elastane
Resistance to Pilling: on fabric: 5
resistant to pilling on fabric: 5
(NU Martindale – ISO 12945-2 7000 rotations)
resistant to pilling on wool: 5
(NU Martindale – ISO 12945-2 7000 rotations)

As the moment this product is easy to wash can protect your pants from stains while keeping warm your foot and leg.

Neoprene thermal insulation over-sock

Article made with Neoprene/Nylon material to protect from low temperatures while using normal boots or footwear.
This product is composed by a 2,5mm neoprene foam between 2 layers of Nylon fabric allowing a good thermal protection while working in low temperatures conditions with no need to change
footwear. The sock is finished with an adjustable elastic fabric to guarantee a better thermal insulation.
Composition: Fabric 100% polyester, neoprenic foam inside
Weight: 600 g/m2
Abrasion Resistance ≥ 25.000 (12 Kpa)
Pilling: 4/5 (2.000 cycles)
Waterproofness ≥ 5.000 mm

Hight thermal protection and insulation.